Easy Control Deuterium Lamp Power Supply , 12v DC Power Supply Multiple Output  

tungsten lamp and Deuterium lamp dual purpose power supply apply to UV spectra chromatography

OWPS-0216DT Dual purpose Power supply for deuterium lamp and tungsten lamp


Input voltage: AC 85 ~ 265V
Maximum input current: 0.8 A
Lamp wire voltage:

preheating:
DC2.5v (2.5v).
DC 10V (10V),
after light on: DC0 (2.5v).DC6 ~ 7V (10V)
Highest anode voltage:

preheating: DC 125V,

after light on: DC 80V
Anode current: 300mA
Constant flow accuracy: 0.005 ‰ (after starting 1h)
Minimum trigger voltage: DC 400V
Withstand pressure: AC 1500V / 1min
Turn off signal: 3 ~ 12V / 1 mA

Description of Tungsten lamp mode
Tungsten lamp voltage: 11.5 V (high precision) or 6V 
Current: 2 A
Turn off signal: 3 ~ 12V / 1 mA

 

OWO now offer a Deuterium lamp power supply that is commonly used in UV spectra chromatography , atomic absorption, UV-Visible spectrophometers and other spectroscopic equipment.

 

Compared to the traditional linear power supplies this deuterium lamp switching power supply abolishes cumbersome transformers, it has set filament preheat, high voltage trigger and constant current control are just a number of features the D2 power supply to ensure the stability of UV spectra. A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85 -265V AC, no switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp.

 

 

USER MANUAL

 

 

Part1....................................................................................................................Introduction

Part 2........................................................................................... Environmental Requirement

Part 3...................................................................................................... Technical parameters

Part 4............................................................................................................................ Wiring

Part 5............................................................................................................ Light up the lamp

Part 6................................................................................................... Installation and Cooling

Part 7.............................................................................................. Transportation and storage

Part 8.............................................................................................Maintenance and attention

 

 

 

 

OWPS 0216DT series Deuterium lamp power supply was developed by OWO team in 2014,and its perfect replacement for expensive original models, the product has CE proved and 18 months warranty.

OWO now offer Deuterium lamp power supply that is commonly used in UV spectra chromatography , atomic absorption, UV-Visible spectrophotometer ,other spectroscopic equipments and also can be connect with tungsten lamp.

Compared to the traditional linear power supplies this deuterium lamp switching power supply abolishes cumbersome transformers, it has set filament preheat, high voltage trigger and constant current control are just a number of features the deuterium power supply to ensure the stability of UV spectra. A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85-265V AC, no switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp.

OWPS 0216DT series deuterium power supply has professional anti-electromagnetic interference design, the electromagnetic interference reach to grade A.

OWPS 0216DT series power supply support deuterium lamp and tungsten lamp use, the voltage offering for the tungsten lamp can be customized to 6V,12V,24V, power range:5W-30W.

 

 

 

Part 2: Environmental Requirement

1. operating environment:

Temp.: 0-40℃

RH: 40℃(20-90)% RH

Pressure: 86-106 KPa

2. storage environment:

Temp.: -40-70℃

RH: 50℃ 90% RH

Pressure: 86-106 KPa

 

 

Part 3:Technical parameters

 

OWPS-0216DT
Voltage input: AC 85 ~ 265V
Maximum input current:0.8A

Filament voltage:

Preheat:DC 2.5V or 10V

Working:0V or 6-7V

Tungsten lamp voltage:

2V-12V

Current:2A

Maximum anode voltage:

Preheat:DC 125V

Working:DC60-80V

Turn off signal:

3-12V/10mA

Anode current:300mA Note: please add effective isolation between deuterium lamp and tungsten lamp

Constant flow accuracy: 0.05‰(after starting 1h)

Minimum trigger voltage:DC 550V
Withstanding Voltage:AC 1500V / 1min
Turn off signal: 3 ~ 12V / 10mA
Dimension:130 * 99 * 40 mm
Net Weight:0.4kg
 

 

 

 

 

Products

Deuterium Lamp Power Supply

Contact Supplier
Change Language

Select Language